EXPOBAR Coffee Machine Parts

EXPOBAR coffee machine spare parts are essential for any bar or café that operates an EXPOBAR espresso machine long-term. Spanish manufacturer EXPOBAR machines are known for their durable mechanical construction, but regular replacement of spare parts is a prerequisite for consistent coffee quality and long equipment life. Timely replacement of spare parts is much more cost-effective than emergency repairs or purchasing a new machine.

Main EXPOBAR coffee machine spare parts

The following spare parts are frequently replaced in EXPOBAR espresso machines. Group gaskets — rubber gaskets in the group head between the head and portafilter; they wear out and harden regularly; should be replaced every 6–12 months. Pump — vibration or rotary pump; EXPOBAR uses both vibration and rotary pumps depending on the model; ensures 9 bar pressure. Heating element — copper or brass thermoblock; heats water to espresso and steam temperature; a critical component. Solenoid valve — controls water flow in each group and steam path; often calcified deposits block the valve; should be replaced when worn. Steam valve — controls steam supply for milk frothing; if cracked or leaking, it should be replaced. Also check out coffee machine parts.

EXPOBAR machine model range

EXPOBAR manufactures several professional espresso machine models with different technologies. EXPOBAR Office Lever — a classic lever machine with manual group control; popular in small cafés. EXPOBAR Mega Crem — a compact, multi-functional machine with a dual-boiler system; widely used in cafés. EXPOBAR Ruggero — a professional multi-group machine for high output; suitable for large bars. EXPOBAR Diamant Pro — a new-generation thermo-siphon system with precise temperature control; top-of-the-range. Each model requires model-specific spare parts — the model must be specified when ordering. Also check out ASTORIA coffee machine parts.

Common EXPOBAR machine problems and solutions

The most common problems with EXPOBAR machines and their solutions with spare part replacement. Water leakage from the portafilter — worn group gaskets; solution: replace gaskets. Reduced extraction pressure — pump wear or limescale deposits in filters; solution: check and replace the pump, descale. Inaccurate temperature — thermostat or heating element issue; solution: replace the temperature sensor or heating element. Interrupted water supply — damaged or clogged solenoid valve; solution: clean or replace the valve. Steam leakage — damaged steam valve or gasket; solution: replace steam path gaskets. BHS helps with correct spare part identification.

EXPOBAR machine maintenance schedule

Regular maintenance with timely replacement of spare parts ensures stable operation of the EXPOBAR machine. Weekly maintenance — clean the group head with a portafilter brush; descale; visually inspect gaskets. Every 3 months — full descaling with descaling solution; acoustic check of solenoid valves; pressure check with a manometer. Every 6–12 months — replace group gaskets; replace solenoid valves as needed; calibrate flow measurement. Annually — check and lubricate the pump; diagnose the heating element; full equipment inspection. BHS provides advice on the EXPOBAR maintenance schedule.

HoReCa usage scenarios

Café with EXPOBAR Mega Crem — monthly group gasket inspection and replacement every six months; BHS supplies gasket sets for the maintenance schedule. Hotel bar with EXPOBAR Ruggero — professional service contract with spare parts supplied by BHS; the machine operates without downtime. Restaurant with EXPOBAR Office Lever — supply of spare parts for older models; BHS helps find parts for old machines. BHS supplies EXPOBAR coffee machine spare parts to bars.

Frequently asked questions

How to determine which spare part is needed for an EXPOBAR machine? Identify the symptom (leakage, pressure drop, temperature issue) and specify the model — BHS helps identify the required part. See coffee machine parts.

Are EXPOBAR spare parts also suitable for other Spanish coffee machines? No — spare parts are model-specific; they are not universal.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.