Choose category
Choose category
Your Cart

O-ring LF L1186352

O-ring LF L1186352
Product images are illustrative
Product images are illustrative. The videos in the product description are for informational purposes only, so the information contained in them may differ from the product itself.

Technical data

Attributes
ARTICLE L1186352
NOTES ring thickness 1.78 mm - internal ø 12.42 mm
O-ring LF L1186352

O-RING 02050 EPDM

  • : LF
  • Article number: L1186352
Is available
0.99€
with VAT: 1.20€

An O-ring creates a watertight or steam-tight seal between two mating surfaces in commercial catering equipment. It sits in a groove, compressed by the closing force of the joint, blocking the escape of liquids or gases under pressure. EPDM rubber is chosen for its resistance to hot water, detergents and steam, making it the standard material for dishwasher and coffee-machine circuits where temperatures and chemical exposure are constant.

The operator replaces the O-ring when a leak appears or during scheduled maintenance. The old ring is removed from its groove, the surfaces are cleaned, and the new ring is pressed into place without twisting. Once the joint is reassembled, the seal is tested by running the machine through a cycle; no further adjustment is needed.

This O-ring is made from EPDM rubber, a synthetic elastomer that remains flexible across a wide temperature range and resists degradation from water, steam and alkaline detergents. The cross-section is 1.78 mm thick, giving enough compression to seal without excessive force, while the internal diameter of 12.42 mm matches the standard groove found in the listed equipment.

The 1.78 mm thickness determines the compression ratio when the joint is tightened, ensuring a reliable seal without distorting the ring. The 12.42 mm internal diameter fits the shaft or port size used in the specified dishwashers and coffee machines, allowing it to sit snugly in the groove without stretching or bunching.

Cleaning is limited to wiping the ring with a damp cloth before installation to remove any dust or grease. No lubrication is required; EPDM remains slip-resistant when dry, preventing the ring from rolling out of its groove during operation.

This O-ring is a direct replacement for the original part in the following equipment: dishwashers by Adler, AFI, Angelo Po, Colget, Comenda, Desco, Dihr, Elettrobar, Eurosystem, Faema, Fiorenzato, Hilta, Honved, Ime Omniwash, Kromo, Lamber, Lasa, Mach, Marels, Modular, Nosem, Nuova Simonelli, Project Systems, Sab Italia, Silanos, So.We.Bo, Sotal, STROME, Thirode, Unic and Zanussi; coffee machines by Brasilia, Expobar, Faema, Fiorenzato and Saeco.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good

Delivery and warranty

Free Shipping
Free delivery throughout Latvia over 200€ up to 30 kg. Does not apply to promotional items. Learn more.
Best Typography Options
12-month warranty for professional equipment, 24 months for “home” products. Learn more.
Professional Maintenance and Repair
A wide range of HoReCa spare parts and knowledgeable craftsmen. Learn more.

Large purchase volume or don't know where to start?