MBM

MBM dishwasher spare parts — timely maintenance and replacement of the drainage pump and water valve systems ensure stable water supply and drainage without downtime in HoReCa kitchens.

MBM dishwasher drainage and water system

MBM — The MBM dishwasher drainage and water supply system is critical infrastructure that ensures the full washing cycle runs smoothly. Drainage pump — The MBM MBM machine drainage pump removes used washing water after each cycle; a worn-out drainage pump cannot fully empty the tank, and the next cycle starts with dirty water; signs of drainage pump wear include slow emptying or water remaining in the tank after the cycle. Water inlet valve — The MBM MBM inlet valve controls the flow of fresh water from the water supply; a worn valve may either underfill the tank or continue filling after reaching the full level; overfilling creates a risk of leaks. Anti-flood protection system — MBM MBM dishwashers have a built-in anti-flood protection system; the sensor or valve of this system is a replaceable spare part; damage can lead to unplanned equipment shutdown. Water level sensor — The MBM water level sensor controls the filling of the washing tank; a damaged sensor can cause underfilling or overfilling. BHS supplies MBM dishwasher spare parts.

MBM rack and dish holder system

MBM — The MBM dishwasher rack system directly affects washing quality and dish placement efficiency. Dish racks — MBM MBM standard dish racks are made of plastic or stainless steel with various cell sizes for different dish sizes; damaged or deformed racks may not hold dishes in the correct position; replace if the rack’s wire structure is damaged. Glass racks — MBM MBM glass racks are specially designed for safe washing of glasses and cups; glass dividers ensure glasses do not touch each other during washing; replace if dividers are damaged or deformed. Rack guides and slides — MBM MBM rack guides and slides ensure smooth insertion and removal of the rack in the machine; damaged guides can cause the rack to jam or come into contact with spray arms. Rack handles — The MBM rack handle is the physical contact zone with cold or hot racks after washing; a damaged handle compromises ergonomic and safe operation; replace immediately. Also check dishwasher spare parts.

Maintenance and HACCP compliance

MBM — Regular maintenance of MBM dishwashers is a prerequisite for HACCP compliant dish hygiene. Daily maintenance — Clean MBM filters every day after the last cycle; check spray arm pressure uniformity; verify washing and rinsing temperatures with a thermometer at least once per shift. Weekly maintenance — Remove and clean MBM spray arms with a descaling agent; clean the tank of sediment; check gasket integrity. Annual maintenance — During annual maintenance, check valves, pump operation and electrical connections; preventive replacement of spare parts before failure reduces the risk of unplanned downtime. Descaling — Determine descaling frequency based on water hardness; for medium-hard water, descaling is recommended every 1–2 months; a water softener significantly reduces limescale problems.

HoReCa usage scenarios

Hotel restaurant with intensive dinner service — MBM; the MBM dishwasher drainage pump was replaced after signs of slow emptying; the equipment was restored to full performance; BHS supplied the replacement pump. Bar with a glasswasher — MBM; MBM glass racks were replaced after divider damage; glasses no longer touch during washing. Canteen with high-volume daily dishwashing — MBM; the MBM water inlet valve was replaced after an overfilling incident; operation stabilized; BHS provides spare parts on time.

Frequently asked questions

What are the signs of MBM dishwasher drainage pump wear? MBM — Key signs: the tank does not empty completely after the cycle; the washing cycle takes longer than usual; unusual sounds are heard during the emptying phase; visible water remains in the tank after a full cycle; diagnose before complete pump failure to avoid emergency downtime; check dishwasher spare parts.

Are MBM dish racks compatible with other dishwasher brands? MBM — Usually not; each manufacturer has its own rack size standard and slide system; MBM racks are designed only for MBM machines with matching slide width; specify the model number before ordering; check AMIKA.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.