Hardware and accessory for heated counter BHS-G GY7V010

A two-drawer module that slides beneath an 800 mm open base to organise hot-cupboard storage. Each drawer runs on full-extension rails, allowing the operator to reach the back without lifting the tray.

The principle is simple: a pair of horizontal runners carries the drawer on ball-bearing slides. When the drawer is pulled, the slides extend fully, bringing the entire contents forward. This eliminates blind corners and reduces the need to stack trays, so food stays visible and accessible during service.

To use the section, the operator first ensures the open base is level and the rails are aligned. The drawer is then loaded with gastronorm trays, pulled out to the stop, and pushed back until it clicks into place. No tools or locking levers are required; the weight of the tray keeps the drawer closed during movement.

Construction is stainless steel throughout, with the runners mounted beneath the drawer frame. The unit measures 800 mm wide, 520 mm deep and 105 mm high, matching the footprint of the open base above.

Compatibility is limited to BHS-G cooking ranges GC11 and GC13, fry tops GG1, neutral elements GN01 and open bases GS02. The section is listed in the catalogue under hot-cupboard accessories.