Anti-slip mesh grating, mesh size 30×30 BHS-G BHS-AB0310-040BK

An anti-slip mesh grating creates a secure walking surface over floor drains and drain channels in professional kitchens. The open grid allows water and small debris to pass through while the raised edges of each mesh cell grip footwear, reducing the risk of slips on wet floors. This design balances drainage efficiency with safety, ensuring liquid does not pool on the surface where staff move frequently.

The grating rests directly over the drain or channel, held in place by its own weight and the surrounding floor structure. No additional fixings are required, allowing quick removal for cleaning or inspection of the drain below. The operator simply lifts the grating when access is needed, then replaces it once the task is complete.

Constructed from AISI 304 stainless steel, the grating resists corrosion from water, cleaning chemicals and kitchen spills. The 30 x 30 mm mesh size provides sufficient open area for drainage while maintaining a stable surface for foot traffic. The material is non-porous, preventing the build-up of bacteria and making it suitable for environments where hygiene is critical.

The 400 mm width and 358 mm depth match standard floor drain and channel dimensions, ensuring a flush fit without gaps. The size allows the grating to cover the drain opening completely, preventing larger debris from entering while still permitting liquid to flow through freely.

Cleaning involves rinsing the grating under running water to remove loose debris, followed by scrubbing with a stiff brush and detergent to dislodge any trapped particles. The stainless steel surface can be sanitised with standard kitchen disinfectants. Regular removal of the grating allows access to the drain below for more thorough cleaning of the channel or trap.

This grating is designed for use in public facilities, including professional kitchens, where frequent foot traffic and wet conditions demand a durable, non-slip surface over drainage points.