Anti-slip mesh grating, mesh size 30×10 BHS-G BHS-AB0110-050CK

An anti-slip mesh grid provides a stable, textured surface over floor drains and drain channels, preventing slips while allowing water and small debris to pass through. The grid rests directly on the drain or channel, held in place by its own weight and the surrounding floor surface. Its open mesh construction ensures liquid flows freely into the drainage system without pooling, while the raised pattern grips footwear, reducing the risk of accidents in wet or greasy environments.

To use the grid, place it over the drain or channel so the edges align with the surrounding floor. No fixing is required; the grid remains in position during normal foot traffic. Water and small particles fall through the mesh, while larger debris can be swept or brushed off the surface. The grid is removed by lifting it from the drain, allowing access for cleaning or maintenance.

Constructed from AISI 304 stainless steel, the grid resists corrosion and withstands frequent cleaning with water and standard kitchen detergents. The mesh size of 30 x 10 mm balances drainage efficiency with surface stability, providing enough open area for liquid to pass while maintaining a firm grip underfoot.

The 500 mm width and 458 mm depth allow the grid to cover standard floor drains and drain channels, fitting neatly into the surrounding floor surface. Its weight ensures it stays in place during use, while the stainless steel material prevents warping or degradation over time.

Cleaning involves rinsing the grid under running water to remove debris, then wiping or scrubbing with a non-abrasive pad if needed. The open mesh design prevents dirt from accumulating, making upkeep straightforward. The grid is designed for use in public and professional facilities, including kitchens, food preparation areas, and wash-down zones where drainage and safety are critical.