Anti-slip mesh grating, mesh size 30×10 BHS-G BHS-AB0110-030CK

An anti-slip mesh grid prevents slips in wet areas by allowing water to drain through while providing a textured surface underfoot. The open mesh design lets liquid pass into the drain or channel below, reducing puddles that cause accidents. At the same time, the raised edges of the mesh create grip, so shoes or trolley wheels do not slide even when the grid is wet. This balance of drainage and traction makes the grid suitable for entryways, wash-down zones and service corridors where water is frequent.

The grid rests directly over a floor drain or channel, covering the opening without blocking it. It is placed in position and left in place during use; no fixing is required unless the installation calls for it. Operators walk across it as they move between kitchen sections, and water from cleaning or spills flows through the mesh into the drainage system beneath. The grid itself is lifted only for cleaning or inspection of the drain below.

Made of AISI 304 stainless steel, the grid resists corrosion from water, detergents and food acids. The 30 x 10 mm mesh size allows small debris to pass through while stopping larger items that could block the drain. The overall dimensions of 300 mm width and 458 mm depth match standard drain and channel openings in professional kitchens and public facilities.

Cleaning is straightforward: the grid is lifted, rinsed with hot water and scrubbed with a brush if needed. Stainless steel does not absorb odours or stains, so regular rinsing keeps it hygienic. When the drain below requires attention, the grid is removed and replaced once the work is complete.

This grid is designed to work with floor drains and drain channels, fitting openings of the stated size without modification. It is used mainly in public facilities such as restaurants, hotels and care homes where safety and hygiene are critical.