Upright freezer TEFCOLD UF700V

A storage freezer built to hold bulk ingredients and prepared dishes at deep-freeze temperatures without ice build-up. The UF700 V uses a fan to circulate cold air evenly across every shelf, so every tray chills at the same rate. This forced-air system also speeds up recovery after the door is opened, keeping the internal temperature steady even during frequent access. To operate, the user sets the desired temperature between -24 °C and -10 °C on the electronic thermostat. The unit starts automatically, pulling heat out of the cabinet and expelling it through the condenser at the rear. An automatic defrost cycle melts any frost that forms on the evaporator, draining the water away without manual intervention. The door locks to secure high-value stock overnight or during service breaks. The cabinet is sized for standard gastronorm trays: three white wire shelves slide out to hold GN 2/1 containers. Each shelf can be repositioned or removed to fit taller items. The exterior footprint of 777 mm wide by 655 mm deep fits against a worktop or wall, while the 1970 mm height allows stacking beneath standard overhead cupboards. The integrated handle keeps the profile clean and reduces snag points in tight kitchen aisles. Construction is a welded steel frame clad in smooth, easy-clean panels. This freezer uses a natural refrigerant that keeps food frozen efficiently while reducing environmental impact in a busy kitchen. Power draw of 0.54 kW is typical for a 440 L freezer on a 220-240 V single-phase circuit. The 113 kg weight means the unit is moved on a trolley or pallet jack rather than lifted by hand. Cleaning follows from the parts present: the wire shelves lift out for washing, the interior surfaces wipe down with a damp cloth, and the condenser coil at the back is brushed clear of dust every few weeks to maintain airflow. No other maintenance is required beyond checking the door seal for wear. The UF700 V is a single model; no variants are listed.