Potato Peeling Machine FIMAR PPN/10M

A potato peeler machine removes skins from root vegetables by tumbling them against an abrasive surface inside a rotating drum. The drum turns at a controlled speed, allowing the vegetables to slide and roll against the abrasive disc and the drum's inner walls. This motion gently scrapes away the outer layer without damaging the flesh, leaving the product clean and ready for further preparation. The process relies on friction rather than blades, so it handles irregular shapes and sizes without waste or manual trimming.

To operate the FIMAR PPN/10M, the operator lifts the transparent polycarbonate lid, loads up to 10 kg of potatoes or similar root vegetables into the drum, and closes the lid. A security microswitch ensures the machine will not start unless the lid is properly shut. The timer is set between 0 and 4 minutes, depending on the desired peel thickness. Once started, the drum rotates, and the vegetables tumble against the removable abrasive disc. An automatic water jet sprays into the drum during operation, washing away loosened skins and keeping the vegetables moist. When the timer expires, the machine stops, and the operator presses the unloading button to release the peeled product through the discharge chute.

The PPN/10M is built with a stainless steel body for durability and hygiene in a busy kitchen. The transparent lid allows the operator to monitor the process without opening the machine. A removable abrasive disc, included with the machine, can be replaced as it wears. The machine does not include a lateral abrasive, which simplifies maintenance and reduces the risk of over-peeling. The 0.75 kW motor provides sufficient power to rotate the drum and handle a 10 kg load without straining the electrical supply.

The voltage requirement of 230/400 V allows the machine to be connected to either a single-phase or three-phase circuit, making it adaptable to most professional kitchen setups. The 37 kg weight ensures stability during operation, while the footprint of 830 x 530 x 950 mm fits on a standard worktop or floor space in a prep area. The 120-unit capacity refers to the number of cycles the machine can perform before the abrasive disc requires replacement, ensuring consistent results over time.

Cleaning is straightforward: the automatic water jet rinses the drum during use, and the removable abrasive disc can be taken out for separate cleaning. The stainless steel body and polycarbonate lid can be wiped down with standard kitchen sanitising solutions. The machine is designed for models PPN-PPF/25 when a side abrasive is required, but the PPN/10M operates without it, focusing on simplicity and efficiency for smaller batches.

This potato peeler is categorised under vegetable preparation equipment in the FIMAR professional range.