Accessory for heat sealer FIMAR B0B03

Films reels designed to supply cling film to professional dispensers keep the roll organised and prevent waste. A central core holds the film, while the reel's width matches the dispenser's cutting edge, ensuring clean, even lengths every time. The film unwinds smoothly under tension, allowing the operator to pull the required amount without tearing or stretching the material unevenly.

To use, the reel is loaded onto the dispenser's spindle, aligning the core with the mounting points. The film is threaded through the cutting mechanism, and the end is secured to the worktop or container. As the operator pulls the film, the reel rotates, dispensing the correct width in a single, continuous sheet. The process repeats until the roll is exhausted, at which point the empty reel is removed and replaced.

Constructed to fit specific dispenser models, these reels are sized to the exact width required by the equipment. The 330 mm platums ensure compatibility with TS3 A and TSAVG dispensers, maintaining a standardised roll that integrates seamlessly with the cutting and dispensing mechanism.

The width of the reel determines the maximum sheet size available, which in turn dictates the size of containers or trays that can be covered in one pull. A 330 mm width accommodates most professional kitchen needs, from small prep bowls to larger gastronorm trays, without requiring multiple sheets or manual trimming.

Replacement is straightforward: once the film is depleted, the empty reel is removed from the dispenser and a new one is installed. No additional cleaning or adjustment is required beyond ensuring the film is correctly threaded through the dispenser's cutting edge.