Mussel cleaning machine FIMAR LCN/10M

A mussel washer removes sand, grit and debris from shellfish by tumbling them in a rotating drum while water jets flush the particles away. The drum's gentle motion lifts and drops the mussels, exposing every surface to the water flow without damaging the shells. This method cleans a full batch in minutes, replacing manual scrubbing and soaking that would otherwise tie up staff and workspace.

The operator loads the mussels through the transparent polycarbonate lid, which latches securely and cuts power if opened during operation. A microswitch on the cover ensures the drum stops immediately, preventing spills or injury. The timer is set between zero and four minutes, allowing the cycle length to match the level of soiling. Once the timer expires, the drum stops and the operator presses the unloading button to release the cleaned mussels into a waiting container.

The body is constructed from stainless steel for corrosion resistance and hygiene. Inside, a removable abrasive brush disc scrubs stubborn residues from the drum walls. An automatic water jet system sprays the interior after each cycle, loosening any remaining debris and reducing manual cleaning time.

The 120-unit capacity allows the washer to handle batches of 6 to 10 kg of mussels at once, making it suitable for medium-volume service. Its 830 mm by 530 mm footprint fits on a standard worktop or mobile stand, while the 950 mm height keeps the lid at a comfortable working level. The 37 kg weight means the unit can be moved with a trolley but is stable once positioned.

The washer accepts either 230 V single-phase or 400 V three-phase power, matching the supply found in most professional kitchens. The 0.55 kW motor provides enough torque to turn the drum smoothly without overloading the circuit.

After service, the transparent lid lifts off for access to the drum and brush disc. The disc is removed, rinsed and stored separately. The automatic water jet flushes the interior, and the stainless steel surfaces are wiped down with a sanitising cloth. No disassembly is needed beyond removing the disc, keeping daily upkeep to a few minutes.

The LCN/10M is listed in the FIMAR catalogue under shellfish preparation equipment.