Confectionery pan trolley 600x400 Gi.Metal BI-15U

A mobile rack that organises pizza and pastry trays in a vertical stack, freeing worktop space while keeping every tray within reach. The cart uses fixed horizontal arms to support each tray at its edges, so the full surface remains clear for loading and unloading. Because the arms are spaced evenly, trays slide in and out without tilting, and the open sides let air circulate around every item, speeding cooling or proofing.

To use the cart, slide each 600x400 mm tray onto the arms one by one, starting from the bottom shelf. The 86 mm gap between shelves leaves room for deep trays or for hands to grip the edges. Once loaded, the cart rolls on four 125 mm swivel wheels, allowing tight turns in corridors and around kitchen islands. A single operator can move up to 80 kg of trays at once, reducing trips between the oven, prep area and storage.

The frame is built from stainless steel, chosen for its resistance to moisture and cleaning chemicals. The arms are welded to vertical supports, eliminating joints that could trap food debris. Each wheel is mounted with a bracket that keeps it aligned under load, preventing wobble when the cart is fully loaded.

Controls are limited to the wheels, which swivel freely for steering. There are no electrical or mechanical settings; the cart is ready to use as soon as it is assembled.

The 510 mm width fits through standard kitchen doorways and alongside worktops, while the 540 mm depth matches the length of a 600 mm tray when it is stored short-side forward. The 1720 mm height allows the cart to hold 15 trays without exceeding typical ceiling clearances. The 80 kg maximum load capacity means the cart can carry a full set of trays even when they are loaded with dough, toppings or finished products.

Cleaning is straightforward: trays are removed, and the stainless steel frame is wiped down with a damp cloth or sanitising spray. The open construction prevents dirt from collecting in corners, and the wheels can be cleaned with a brush to remove flour or grease.

The BI-15U is a single model with no variants. It is designed to fit standard 600x400 mm trays used in professional pizzerias and pastry kitchens.

This cart is listed in the Gi.Metal catalogue under mobile storage for bakery and pizza equipment.