Water T-piece for rinse aid dispenser Stalgast C008931

A water T-piece rinse aid dispenser connects directly into the rinse water line of a commercial dishwasher. It introduces rinse aid into the final rinse cycle without interrupting the flow of water. The T-shaped fitting splits the water stream, drawing a measured amount of rinse aid from a reservoir and mixing it evenly into the water before it reaches the dishes. This method ensures the rinse aid is distributed consistently, preventing water spots and promoting faster drying by reducing surface tension.

The operator fits the T-piece into the existing rinse line, typically between the rinse pump and the spray arms. No electrical connection is required; the water pressure drives the rinse aid through the dispenser. Once installed, the dispenser works automatically with every rinse cycle, eliminating the need to add rinse aid manually to each load. The reservoir is refilled as needed, usually through a small fill port accessible without disassembling the dishwasher.

Constructed from materials suitable for continuous contact with water and rinse aid chemicals, the T-piece is designed to withstand the temperatures and pressures of commercial dishwashing cycles. It requires no separate controls; the flow of rinse aid is regulated by the water pressure and the design of the internal passage.

Cleaning involves periodic inspection of the T-piece and rinse line for blockages or build-up. The reservoir should be emptied and rinsed when refilling to prevent residue accumulation. No disassembly is typically needed for routine maintenance, as the internal passage is self-cleaning during normal operation.

This component is a spare part for commercial dishwashers, fitting models that use a rinse aid dispenser integrated into the water line rather than a separate electronic dosing system.