Water boiler Stalgast 751186

A water boiler designed for continuous supply of hot water in professional kitchens, bakeries and canteens. Instead of a kettle that must be refilled and reheated, this percolator holds a fixed volume of water inside a double-walled tank. An internal heating element raises the temperature to the set point and maintains it, so the next batch of water is ready without delay. The process begins with cold water poured into the tank through the top opening. A liquid level indicator on the side shows how much water remains, preventing overfill. The operator sets the desired temperature on the thermostat, which ranges from a gentle 30 °C for warming to a full 110 °C for boiling. Once switched on, the element heats the water evenly, while the double-walled construction reduces heat loss and keeps the outer surface cooler to the touch. Non-heating plastic handles on both sides allow safe repositioning even when the unit is hot. Operation is straightforward: fill, set the thermostat, and switch on. The built-in heater cycles on and off to hold the chosen temperature, so water is always available at the tap. When the level drops, the indicator signals that a refill is needed, and the process repeats without interruption. The boiler is constructed with a stainless-steel tank and outer casing, chosen for durability and resistance to corrosion in wet environments. The double wall adds insulation, reducing energy waste and surface heat. The 2.5 kW power rating means the unit draws a steady load on a 230 V circuit, typical of commercial kitchen supplies. Its compact dimensions—498 mm high and 290 mm in diameter—allow it to sit on a worktop or shelf without occupying excessive space. The double-walled stainless-steel tank and smooth interior surfaces let you wipe away scale or residue after each service without disassembling the boiler. The stainless-steel tank can be wiped down after draining, and the plastic handles and level indicator are easily cleaned with a damp cloth. The double-walled design prevents condensation from forming between the layers, so no moisture collects inside the casing. This model is a single version with fixed volume and power, supplied as a complete unit. It is placed in the catalogue under professional water boilers and percolators.