Washer arm slide Stalgast C012793

A washer arm slide supports the rotating spray arm in a commercial dishwasher, allowing it to glide smoothly on its track while hot water and detergent spray through its jets. The slide bears the weight of the arm and the water inside it, reducing friction so the arm turns evenly under pressure. Without a slide, the arm would drag or jam, leaving dishes unevenly cleaned and increasing wear on the motor and bearings.

The operator loads the slide into its designated slot beneath the spray arm, securing it so the arm sits level and can rotate freely. Once the dishwasher is started, the slide carries the arm through every wash, rinse and dry cycle, maintaining consistent coverage across the rack. After the programme finishes, the slide remains in place until the next load or until routine maintenance checks.

This Stalgast washer arm slide is a replacement part designed to fit specific commercial dishwasher models. It is constructed to withstand repeated exposure to high temperatures, water and detergents without deforming or corroding. Regular inspection and replacement of slides help prevent spray arm misalignment and extend the life of the dishwasher's motor and pump.

The slide's role in the wash sequence is critical: it ensures the arm spins at the correct speed and angle, distributing water evenly across every plate, glass and utensil in the rack. A worn or missing slide disrupts this rotation, leading to spots, streaks or incomplete cleaning, which increases rewash rates and water consumption in a professional kitchen.