Table with 2 drawers and 2 sliding doors Stalgast 980356120

A stainless steel worktop table built for continuous use in professional kitchens, combining a food-safe prep surface with organised under-counter storage. Two full-extension drawers and two sliding doors keep utensils, small equipment and ingredients within arm's reach while keeping the worktop clear for active tasks. The table stands on four adjustable feet that level the unit on uneven floors, preventing wobble and spills. The worktop is a single sheet of stainless steel, seamless at the corners, so liquids and debris cannot collect in joints. Underneath, the storage volume is divided into two compartments: the drawers slide out for quick access to frequently used items, while the sliding doors enclose deeper space for larger containers or bulk ingredients that need protection from kitchen traffic. To use the table, the operator loads the drawers with small tools or packets, then closes them with a gentle push until the soft-close mechanism engages. The sliding doors run on nylon rollers, moving smoothly along the full width of the cabinet without swinging into walkways. When the worktop is needed, the operator simply clears the surface, wipes it down, and begins prep without moving away from the station. The seamless stainless-steel carcass and worktop shrug off splashes of boiling stock and the daily scrub with caustic detergent without warping or staining. The worktop thickness and the gauge of the cabinet walls are standardised for commercial use, ensuring the table supports the weight of heavy pots and appliances without flexing. The adjustable feet are threaded for fine tuning, and the feet themselves are non-marking to protect floor finishes. Controls are limited to the soft-close mechanisms on the drawers and the roller tracks on the doors; no electrical or programmable elements are present. The table is purely mechanical, requiring no power supply and generating no heat or noise. The stated footprint of 1200 x 600 mm gives the space the table occupies on the floor, including the doors when fully open. The 900 mm height matches standard worktop levels in professional kitchens, aligning with adjacent counters, hobs and sinks for a continuous workflow. The depth of 700 mm plus a 10% tolerance allows for slight variations in installation without affecting the usable surface area. Grease wiped from the doors with a cloth leaves no streaks, and the full-length drip tray under the worktop can be lifted out and rinsed under a tap. The stainless steel worktop and cabinet can be wiped with a damp cloth and commercial sanitiser; no seams or crevices trap food particles. The drawers and doors should be emptied and removed periodically to clean the roller tracks and soft-close dampers, preventing dust build-up that could slow movement. The adjustable feet should be checked for tightness to maintain stability. The table is supplied as a single unit; no variants or additional modules are listed for this article. It is categorised in the Stalgast range as a general-purpose work and storage table for professional catering environments.