Oil bath screw LF L3359076

An oil bath screw seals the lubrication reservoir in commercial mixers that rely on an oil-filled gear housing. The screw threads into the casing, creating a leak-proof closure around the rotating shaft. Oil inside the housing coats the gears continuously, reducing friction and heat build-up during prolonged mixing cycles. Without a secure seal, oil escapes, leaving gears unprotected and shortening the mixer's working life.

To use the screw, the operator first drains any old oil from the mixer's gear housing. After refilling with fresh lubricant, the oil bath screw is threaded into its port by hand until snug, then tightened with a spanner to the manufacturer's torque setting. The seal prevents oil from seeping out while the mixer runs, ensuring consistent lubrication under load.

Constructed from plated steel, the screw resists corrosion in a kitchen environment where moisture and cleaning chemicals are present. The ½" thread matches the standard port size on LF commercial mixers, forming a precise fit that maintains the oil-tight seal.

This spare part fits LF commercial mixers requiring a ½" oil bath screw for gearbox maintenance. It is listed in the catering spares section under mixer components.