Adjustable foot LF L3313119

An adjustable foot lets a heavy commercial dishwasher or glasswasher sit level on an uneven floor without rocking. The foot threads into a mounting point on the base of the appliance and can be turned clockwise or anti-clockwise to raise or lower that corner. When all four feet are set, the machine stands solidly, the door seals properly and the wash cycle runs without vibration.

The operator places the appliance roughly in position, then uses a spanner to turn each foot until a spirit level on the worktop shows the unit is horizontal. Once the feet are locked with the locking nut, the machine stays at the chosen height and can be moved for cleaning without losing the setting.

This LF adjustable foot is made of plated steel for corrosion resistance and long service under wet conditions. The threaded shaft allows fine adjustment, while the broad base spreads the load across the floor.

It fits a wide range of professional dishwashers and glasswashers, including models from AMIKA (3X, 4X, 30X, 40X, 40XH, 41XL), ANGELO PO (KD37, KD40, KN37, KN40 and various KD37/KD40 variants), APACH (AF402), COLGED (BETA235, PROTECH411G, STEEL31H, STEELTECH13-00 and many others), DESCO (DS40D), DEXION (D400LB, LB035-06-000-13 A, LB041-06-000 and others), DIHR (103U, 104U, 105U, 125EU, 32ELK and the full GS and TEKNO ranges), ELETTROBAR (E40H C.T, FAST135, NIAGARA341, OCEAN340, RIVER242 and others), ELFRAMO (BE40, BE50, SQ60), EMMEPI (LBE34, LBE40E), EUROWASH (330, 340, 403, 440H), HOBART (H400, ECOMAX 400), KOMEL (F11, F13), MBM (LB35, LB40), MEIKO (DV120.2, DV125.2, K160, K400) and WOLK (400HP, WKG39).

Cleaning is simple: wipe the foot with a damp cloth to remove detergent residue and prevent corrosion. Check the locking nut periodically to ensure it has not worked loose during use.