Abrasive disc LF L9720624

An abrasive disc removes layers of material by rotating at high speed against a surface. The disc's grit abrades the top layer, leaving a smooth or textured finish depending on the coarseness. This method is used for cleaning, deburring or shaping metal, plastic or stone without chemicals or heat, making it a dry, mechanical process that suits food-preparation environments where hygiene and residue control matter.

The operator slides the disc onto the machine's long extractable shaft until the 28 mm diameter hole fits over the spindle. A 15 mm depth collar inside the hole centres the disc and prevents wobble. Once the shaft is locked in place, the disc spins concentrically, allowing even contact across the full 280 mm diameter. The operator guides the machine over the work surface, adjusting pressure to control the rate of material removal.

The disc is a single flat circle of bonded abrasive material. The fixing hole is precision-cut to the stated dimensions, ensuring a secure fit on compatible shafts without additional fasteners.

The 280 mm diameter gives a wide working path, reducing the number of passes needed on large surfaces. The 28x15 mm fixing hole matches machines designed for long extractable shafts, allowing the disc to be mounted and removed quickly during routine maintenance or when switching between tasks.

Cleaning involves removing accumulated debris from the disc's surface with a stiff brush or compressed air. The disc should be stored flat to prevent warping and kept dry to avoid degradation of the abrasive bond.

This disc is a direct replacement for machines with long extractable shafts that require a 280 mm abrasive disc and a 28x15 mm fixing hole.

Catalogue placement: spare parts, abrasive accessories.