More from this brand
Technical data
| Attributes | |
| ARTICLE | C007535 |
A gas nozzle meters the flow of liquefied petroleum gas into the burner of a professional hob. The orifice is a small, precisely drilled hole in a brass body; its diameter determines how much gas passes at a given pressure. LPG, being denser than natural gas, requires a smaller opening to deliver the same heat output. When the tap is opened, gas travels through the nozzle and mixes with air drawn in by the venturi effect, producing a stable, controlled flame for cooking.
To install the nozzle, the operator first isolates the gas supply and allows the hob to cool. The existing nozzle is unscrewed from the burner assembly using a spanner, and the new 0.90 mm nozzle is fitted in its place. The thread is tightened just enough to prevent leaks, and the gas is restored. A leak test with soapy water confirms the seal before the hob is relit. The process is repeated for each burner that uses LPG.
The nozzle is manufactured from brass, a material chosen for its resistance to corrosion and its ability to be machined to tight tolerances. Brass also conducts heat away from the burner, reducing the risk of distortion that could alter the orifice size over time.
This nozzle is a direct replacement for burners calibrated to LPG on Stalgast and other professional kitchen equipment. It fits hobs, grills and ranges where the manufacturer specifies a 0.90 mm orifice for LPG fuel.
The product is listed in the catalogue under Gas Components & Spares, Nozzles & Jets.