Large burner crown Stalgast C009040

A big burner crown concentrates gas flames into a single, powerful ring of heat directly beneath the pan. The crown's raised ports channel the gas mixture upward, where it ignites into a continuous circle of blue flame. This design spreads heat evenly across the base of large pots and stockpots, preventing hot spots that can scorch sauces or slow down boiling. The concentrated output also shortens the time needed to bring large volumes of liquid to a rolling boil, which is essential when preparing stocks, pasta or blanching vegetables in bulk.

To use the burner, the operator fits the crown onto the hob's gas valve stem, ensuring the ports align with the gas outlet. Once seated, the gas tap is opened and the flame is lit. The operator adjusts the tap to control the size of the flame, watching for a steady ring without yellow tips, which would indicate incomplete combustion. When finished, the tap is turned off and the crown is left to cool before removal.

The crown is a direct replacement part for professional gas hobs that require a high-output burner for large-format cooking. Its construction matches the original equipment, allowing it to integrate seamlessly with the hob's existing gas and ignition systems.

Cleaning follows the same routine as the hob itself: after each service, the crown is brushed free of food debris and wiped with a damp cloth. Stubborn deposits are soaked in warm water with a mild detergent, then scrubbed with a non-abrasive pad. The ports must remain clear to maintain an even flame pattern, so a small wire brush is used to dislodge any carbon build-up inside the gas channels.

This article is listed in the catalogue under hob spares and accessories, specifically for big-burner replacements.