Heating element LF L3755534

A heating element transfers electrical energy into heat within the oil vat of a commercial fryer. The element sits submerged in the oil, raising its temperature evenly so that food cooks quickly and develops a crisp exterior without absorbing excess oil. Because the element is in direct contact with the oil, its surface must conduct heat efficiently while resisting corrosion from hot cooking oil and cleaning chemicals.

To use the element, first disconnect the fryer from the power supply. Drain the oil and remove the old element by unscrewing its mounting bracket. Position the new element so that its entire length is submerged when the vat is filled, then secure it with the bracket. Reconnect the electrical terminals, refill the vat with oil, and restore power. The thermostat will regulate the element's output to maintain the set frying temperature.

The element is constructed as a single flat plate of corrosion-resistant alloy, 285 mm long and 125 mm wide. Its 2000 W power rating draws a steady load on a 230 V single-phase circuit, the standard supply in professional kitchens. The compact dimensions allow it to fit the oil vats of the listed FIMAR fryer models without modification.

A 230 V connection means the element plugs into the same circuit as most kitchen appliances, avoiding the need for a dedicated high-current line. The 2000 W rating indicates the rate at which it heats the oil, allowing the fryer to reach operating temperature in minutes rather than tens of minutes. The 285 mm length spreads the heat over a larger area, reducing hot spots and extending the life of the oil.

Cleaning involves wiping the element's surface with a non-abrasive cloth after the oil has cooled and been drained. Avoid immersing the electrical terminals in water or using wire brushes, as these can damage the protective coating and shorten the element's service life.

This element is a direct replacement for the original part in FIMAR fryer models FT4, FT44, FT44N, FT4N, FT8, FT88, FT88N, FT88RN, FT8N, FT8RN, FTSF99N, FTSF9N, SF9 and SF99.