GN 2/1 pan and tray trolley ROCAM 039002/1C16IN

A mobile rack designed to hold gastronorm trays securely while they move through a professional kitchen. The trolley's frame supports trays on horizontal rails, preventing them from sliding when the unit is pushed or pulled. Four swivel castors allow the trolley to turn in tight spaces, while the optional brake kit locks two of the wheels to hold the trolley in place during loading or unloading. The trolley accepts either sixteen full-size GN 2/1 trays or thirty-two half-size GN 1/1 trays. Each tray rests on a C-shaped guide that keeps it aligned and stops it from tipping when the trolley is in motion. Non-marking bumpers on each corner protect walls and door frames from scuffs. Operation is straightforward: slide each tray onto the rails until it clicks into the C-shaped guide, stack the trays in the required order, then push the trolley to the next station. When the brakes are fitted, engage them before adding or removing trays to keep the trolley stationary. The frame is constructed from AISI 304 stainless steel, chosen for its resistance to corrosion and ease of cleaning. All visible surfaces are polished to a smooth finish that sheds food debris and moisture. Controls are limited to the optional brake pedals; each pedal locks one castor when pressed. No electrical supply or programming is required. The stated capacity of sixteen GN 2/1 trays determines the volume of food that can be transported in a single trip. The overall dimensions of 722 mm wide, 652 mm deep and 1603 mm high set the space the trolley occupies on the floor and the clearance needed to pass through doorways. The 27 kg weight indicates that the trolley can be moved by one person, although two may be needed when it is fully loaded. The seamless stainless-steel C-shaped rails let you slide out every tray without snagging cloths or sponges, so the daily wipe-down is done before the water has cooled. Stainless steel surfaces can be wiped with a damp cloth and a mild detergent; the open frame allows access to every rail and corner. Castors should be checked periodically for debris that could impede movement, and the optional brake mechanism should be tested to ensure it holds under load. Variants include the optional brake kit, which adds two castors with integrated brakes. The trolley can also be customised to accept different tray sizes, although the standard configuration is for GN 2/1 and GN 1/1 trays only. The trolley is categorised under mobile storage and transport equipment for gastronorm trays.