Food service area lamp Stalgast 692500

A food heating lamp keeps plated dishes at serving temperature without overcooking or drying. It directs infrared heat downward from a quartz or halogen element, warming the surface of the food while leaving the interior untouched. The heat is gentle and even, so sauces stay glossy and meats retain moisture. Because the lamp does not rely on hot air, it avoids the drying effect of a pass-over warmer or the uneven heat of a bain-marie. The height of the lamp is adjustable, allowing the operator to control the intensity of the heat for different dishes and plating styles. The lamp's single switch lets you keep plates warm without bending or reaching over hot surfaces. The lamp is positioned above the pass or counter where plates are assembled. Once switched on, the element reaches operating temperature within seconds. The height is set so that the heat reaches the food without scorching garnishes or melting butter. Plates are slid underneath and left until service is complete. When the shift ends, the lamp is switched off and allowed to cool before cleaning. Stainless steel housing slides under the chrome-plated reflector so grease and steam wipe off before they bake on. The housing is a single sheet formed into a canopy that shields the element and directs the heat downward. The support column is tubular and telescopic, allowing the height to be adjusted without tools. The base is a flat plate that sits on the worktop or can be fixed to a shelf or rail if required. The single control is an on-off switch. The 230 V supply means the lamp plugs into a standard UK single-phase circuit, the same as most counter-top appliances. The 0.5 kW power rating keeps the load light, so it can share a circuit with other low-demand equipment without tripping breakers. The footprint of 360 mm by 480 mm gives a compact canopy that fits above a standard pass or plating station without crowding the work surface. The overall height of 605 mm allows clearance for tall plates and serving dishes while keeping the lamp within easy reach for adjustment. Cleaning is limited to the external surfaces. The stainless steel canopy and column are wiped with a damp cloth and mild detergent after each service. The element itself is sealed and requires no maintenance beyond occasional dusting with a soft brush to keep the heat output consistent. The lamp is supplied as a single unit; no variants or accessories are listed for this model. Catalogue placement: counter-top food holding and display equipment.