Flushing arm Stalgast C012369

A flushing arm directs a strong, controlled jet of water across the entire surface of a commercial sink, removing food debris and detergent residue without manual scrubbing. The arm pivots on a vertical spindle, allowing the operator to sweep the jet from side to side and cover every corner. Water pressure from the tap drives the rotation, so no electricity or additional pump is needed.

To use the arm, the operator attaches it to the existing tap outlet with the threaded connector. Once the tap is opened, water flows through the arm and exits through angled nozzles at the end. The force of the water causes the arm to spin, creating a circular spray pattern that reaches the full width of the sink. The operator can adjust the angle of the nozzles to vary the height and reach of the jet, ensuring thorough coverage of both the basin and the splash-back.

The flushing arm is constructed from corrosion-resistant materials suitable for continuous contact with water and cleaning chemicals. It fits standard commercial taps and is secured with a locking nut to prevent loosening during use.

Cleaning is limited to periodic removal of limescale from the nozzles and inspection of the threaded connector for wear. No lubrication or disassembly is required.

The catalogue lists the flushing arm under sink accessories and cleaning equipment.