Equipment stand Stalgast 9703300

A stainless steel base unit organises the space beneath a worktop or heating appliance, turning dead volume into accessible storage. Four full-extension drawers slide out on runners, each rated to hold 25 kg of utensils, ingredients or small equipment. The drawers remain at waist height, so staff can reach without bending or stretching, and the open fronts allow quick identification of contents during service. The unit stands on a reinforced frame that carries the weight of the appliance above and the load inside the drawers. Adjustable feet level the base on uneven floors, preventing wobble and ensuring the drawers run smoothly. Because the drawers are enclosed within the stainless steel body, they are protected from knocks and spills, and the contents stay clean and dry. Each drawer is loaded by placing items inside, then sliding the drawer shut until it clicks. The full-extension runners let the drawer open fully, so nothing is hidden at the back. When the drawer is closed, the soft-close mechanism prevents slamming, reducing noise and wear. The 25 kg load capacity per drawer means bulk ingredients, heavy pots or stacks of trays can be stored without overloading. The 840 mm width matches standard worktop and appliance widths, so the base fits seamlessly into existing kitchen layouts. The 600 mm height places the drawers at a comfortable working level, and the 640 mm depth provides ample storage without protruding into walkways. Stainless steel construction resists corrosion, stains and heat, and the smooth surfaces wipe clean with a damp cloth. The reinforced corners and welded seams prevent flexing under load, ensuring the unit remains stable over years of use. Cleaning involves removing the contents, wiping the interior and exterior with a mild detergent solution, and drying to prevent water spots. The runners should be kept free of debris to maintain smooth operation. The smooth stainless steel surfaces and seamless drawer runners let you wipe away grease and flour without pulling a single screw. This base is part of the Stalgast heating chain range, designed to support appliances such as hot cupboards, bain-maries and heated pass-through units. It is also used as a general storage unit beneath worktops, sinks or preparation areas in small, medium and large catering establishments.