Drain hose LF L3450057

A drain hose carries wastewater from a commercial dishwasher or glasswasher to the building's drainage system. The hose connects to the appliance's outlet and directs used water away without leaks or backflow, ensuring continuous operation during high-volume service. Its smooth bore and flexible construction allow it to bend around corners and fit into tight spaces beneath worktops or inside cupboards, while the diameter is sized to match the machine's pump output so that water flows freely without creating pressure that could damage seals or joints.

To install the hose, the operator first shuts off the water supply and disconnects the old hose from both the appliance and the drain pipe. The new hose is then attached at the appliance's outlet, secured with a clamp, and routed to the drainage point. Once the far end is connected and sealed, the operator checks for kinks and ensures the hose slopes downward slightly to prevent standing water. After reconnecting the water supply, a test cycle confirms there are no leaks before the machine returns to service.

The LF drain hose is constructed from a flexible polymer that resists heat and detergents, maintaining its shape and integrity through repeated wash cycles. Its 24 mm internal diameter and 1500 mm length are chosen to suit the flow rates and installation clearances of the listed professional models.

This hose fits a wide range of commercial dishwashers, glasswashers, cupwashers and utensil-washing machines from AGB, EMMEPI, LAMBER, SILANOS and WHIRLPOOL-INDESIT, including conveyor, hood and under-counter types. It is listed in the catalogue under dishwasher spares and accessories.