Dishwasher accessory Stalgast 815400

A cutlery basket holder organises the flow of washed cutlery in a commercial dishwasher. It sits on the dish table, the flat worktop immediately after the machine's final rinse. The holder has a rim that matches the standard cutlery baskets used in professional kitchens; the baskets slide in and stay upright so the cutlery can drip and air-dry without falling over or blocking the table. The holder is loaded as soon as the dishwasher cycle finishes. The operator removes the baskets from the machine, places them into the holder's four slots, and leaves them to drain. Once dry, the cutlery is ready for sorting and storage without needing a separate drying rack or extra space on the worktop. Construction is stainless steel throughout, formed into a single tray with raised edges and four circular cut-outs. The tray's footprint of 265 mm by 305 mm fits most commercial dish tables, and the 200 mm height keeps the baskets at a comfortable working level. No controls are fitted; the holder is a passive accessory that relies on its shape to keep baskets upright. The size of 265 × 305 × 200 mm determines where the holder can be placed. It needs a flat, stable surface at least this large, and the 200 mm height means it will sit above most sink rims and below overhead cupboards. The weight is light enough to move by hand but solid enough to stay in place during use. Cleaning is straightforward: wipe the stainless steel tray with a damp cloth and mild detergent after each shift to remove water marks and food residue. The basket slides straight onto the dish table rails without tools or clips. This version is the 4-hole model, compatible with standard cutlery baskets used in Stalgast and most other professional dishwashers.