Crepe maker Neumarker L12-40906

A pancake pan of the continuous-contact type, the Neumarker ACTIVE II transfers heat directly from two cast-iron plates into the batter. Cast iron holds and spreads heat evenly, eliminating hot spots that scorch thin mixtures. The plates are fixed in place, so the operator works without tilting or flipping; the batter cooks on the same surface it is poured onto, producing a uniform golden finish across the full diameter.

The sequence begins by switching on each plate individually. A pilot light confirms power, and the thermostat brings the plate to the set temperature. Batter is ladled onto the hot surface, spread with a crepe spreader, and left to cook until the edges lift. The cooked pancake is then slid off, and the next portion is poured without waiting for the plate to cool. Two plates allow two batches to cook simultaneously, doubling throughput during service.

Construction is a stainless-steel casing that encloses the heating elements and supports the cast-iron plates. Height-adjustable feet level the unit on uneven floors and raise it clear of worktop spills. Each plate has its own plug, requiring two separate 230 V circuits to run both sides at full power.

The dual 3.2 kW elements draw a combined load that must be supplied by two dedicated circuits, each protected by its own fuse. The 230 V rating matches the standard single-phase supply found in most commercial kitchens. At 40 kg, the pan is heavy enough to stay stable during use but light enough to be moved by two staff when the kitchen is reorganised.

Cleaning follows from the materials: the cast-iron plates are scraped while still warm, then wiped with a dry cloth to preserve seasoning. The stainless-steel casing is wiped with a damp cloth and mild detergent, avoiding abrasives that could scratch the finish. The feet are checked periodically to ensure they remain tight and level.

The ACTIVE II is a single model with no variants. It is listed in the Neumarker catalogue under continuous-contact griddle equipment.