More from this brand
Technical data
| Attributes | |
| ARTICLE | JD600-2 |
| POWER | 2.3 kW |
| SIZE L/W/H | 730 / 470 / 940 mm |
| VOLTAGE | 230 V |
| NOTES | 2 x 300 gr / 3 min. |
Capacity 2 x 300gr. / 3 min.
- : FRANCESCO PALANCA
- Article number: JD600-2
A popcorn maker built for two simultaneous batches separates sweet and salty servings without cross-contamination. Each chamber holds a measured charge of kernels and oil; electric elements beneath the vats heat the oil until the kernels expand into fluffy popcorn. The process relies on rapid heat transfer through the oil, which ensures even cooking and prevents scorching. A built-in mixer stirs the kernels continuously, so every piece is exposed to the same temperature and no unpopped kernels remain at the bottom.
The operator loads each 300 g charge of kernels into its own vat, adds the required oil, and selects either standard or quick cooking mode. Once started, the machine heats the oil, activates the mixer, and begins popping. After three minutes the cycle completes; the elements switch off while a heated storage shelf beneath the vats keeps the finished popcorn warm and crisp. LED lighting inside the chambers lets the operator monitor the process without opening the doors.
The construction combines stainless steel for the frame, vats and heated shelf with tempered glass for the front and side panels. The original old-stamp design on the front panel gives the unit a traditional appearance while the internal components remain modern. Two separate chambers allow the kitchen to produce sweet and salty popcorn at the same time, doubling output without additional floor space.
A single power switch controls the entire unit, while separate mode selectors for each chamber let the operator choose standard or quick cooking independently. The 2.3 kW power rating indicates the load on the electrical circuit; the machine requires a dedicated 230 V supply capable of handling the starting surge.
The 730 mm width and 470 mm depth determine the footprint on the worktop or counter; the 940 mm height allows the operator to load and unload without bending. The stainless steel surfaces and tempered glass panels are wiped clean with a damp cloth after each use; the vats and mixers are removed for thorough washing in a sink or dishwasher.
The JD600-2 is a dual-chamber popcorn maker designed for professional catering environments where sweet and salty popcorn are served side by side.