Corner table Stalgast ST240111

A stainless steel corner table inner transforms an unused corner into a compact workstation, keeping ingredients and utensils within arm's reach without occupying the centre of the kitchen. The angled design follows the shape of a standard 90-degree corner, allowing the unit to slot neatly between existing runs of worktop or cupboard. A shelf beneath the work surface adds a second storage level, doubling the usable area while keeping the footprint small.

The unit stands on adjustable feet, which level the table on uneven floors and raise it clear of spills. The work surface is a single sheet of stainless steel, rolled to form a backsplash that prevents liquids from running behind the unit. The shelf below is also stainless steel, supported by a welded frame that transfers the load directly to the legs. No tools are needed to assemble the unit; the legs bolt to the frame and the shelf drops into pre-drilled slots.

To install, position the table in the corner, align the front edges with the adjacent worktops, and adjust the feet until the surface is level. The shelf is then inserted and secured with the supplied clips. Once in place, the table provides a continuous work surface that links two sides of the kitchen, eliminating the need to walk around the corner to reach ingredients or equipment.

The stainless steel construction resists corrosion, heat and staining, and can be wiped down with a damp cloth or sanitised with standard kitchen cleaners. The shelf and work surface are seamless, with no crevices where debris can collect. The backsplash is integral, so there are no joints to trap grease or moisture.

Overall dimensions of 1187 mm wide, 635 mm deep and 880 mm high allow the table to fit beneath standard worktop heights and leave clearance for overhead cupboards. The weight of the unit ensures stability without anchoring, while the compact size makes it suitable for kitchens where space is limited.