Cold beverage equipment SPM-ICE 560593

A cold beverage dispenser keeps drinks chilled by circulating refrigerant through a cooling coil wrapped around each tank. The refrigerant absorbs heat from the liquid, lowering its temperature without freezing it. Two separate tanks allow different drinks to be served at the same time, each maintained at the correct chill level for consistent flavour and texture. The cooling system runs continuously, ensuring drinks stay cold even during peak service, while the refrigerant's properties prevent ice crystals from forming inside the tanks, which could alter the drink's smoothness or cause blockages in the dispensing tap.

To use the FROSTY 2, fill each 12 L tank with the chosen beverage, then switch the unit on. The manual control panel lets the operator set the desired temperature for each tank independently. Once the drinks reach the set chill, the dispenser holds them at that temperature until service begins. During operation, the LED-illuminated lid highlights the tanks, making the drinks visible to customers. The night defrost function can be activated after service; it briefly warms the tanks to melt any frost that has formed, simplifying the next morning's cleaning. When the defrost cycle finishes, the unit returns to standby, ready for the next day's use.

The FROSTY 2 is built with two insulated tanks, each holding 12 L of beverage. The exterior is finished in black and white, and the lid is fitted with LED lighting. The refrigerant used is R290, a hydrocarbon that cools efficiently while having a low environmental impact. The manual control panel includes separate temperature controls for each tank and a switch for the night defrost function.

The 1.05 kW power rating indicates the load the dispenser places on the electrical supply; it requires a 220-240 V circuit. The 52 kg weight means the unit is moved on a trolley or with two people. The footprint of 400 mm wide, 555 mm deep and 825 mm high determines the counter or floor space it occupies in the serving area.

Cleaning involves emptying the tanks, wiping the interior with a sanitising solution, and rinsing. The night defrost function helps loosen any residue, making it easier to remove. The exterior surfaces can be cleaned with a damp cloth and mild detergent. The manual control panel should be wiped with a dry or slightly damp cloth to avoid moisture entering the electronics.

The FROSTY 2 is available in a black and white finish. It is listed in the catalogue under cold beverage dispensers, double-tank models.