Bain-marie Stalgast BHS982256076

A neutral marmit keeps gastronorm trays warm in a heated water bath rather than over direct heat. The water transfers warmth evenly around the trays, preventing hot spots and keeping sauces, soups and stews at serving temperature without further cooking or drying out.

The operator fills the lower tank with water to the marked level, then places two GN 1/1 trays into the upper wells. Once the unit is switched on, an electric element heats the water; the warmth rises through the stainless-steel walls of the wells, surrounding the trays with gentle, consistent heat. No direct flame or element touches the food, so delicate items stay stable for hours.

To use, plug the marmit into a 230 V single-phase supply, set the thermostat to the desired holding temperature and allow the water to warm. The trays sit above the water line, never submerged, so the contents remain dry while the heat circulates. When service is finished, switch off, drain the water and remove the trays.

The cabinet is constructed from stainless steel, with a worktop that accepts standard GN 1/1 trays. The footprint of 760 mm by 600 mm fits most counter or stand configurations, and the overall height of 850 mm allows comfortable access without stooping. A 1.7 kW element provides sufficient heat to maintain temperature across both wells.

Controls consist of a single thermostat knob that adjusts the water temperature. The setting determines how warm the trays become, allowing the operator to match the heat to the food being held.

The 230 V requirement means the unit plugs into a standard UK single-phase circuit, the same as most kitchen appliances. The 1.7 kW power rating indicates a moderate electrical load, suitable for a dedicated circuit in a professional kitchen. The 760 mm by 600 mm footprint reserves counter space for two full-size trays while leaving room for adjacent equipment. The 850 mm height positions the wells at a comfortable working level for most staff.

After each service, drain the water tank to prevent scale build-up and wipe the stainless-steel surfaces with a damp cloth. The trays themselves are not included, so they can be cleaned separately according to the food being held.

This model is configured for two GN 1/1 trays only; no other sizes or quantities are accommodated.

The product is listed in the Stalgast catalogue under neutral marmits for gastronorm trays.