Water inlet tubing LF L1192026

Black water inlet tubing connects the mains supply to the internal water circuit of a coffee or vending machine. A flexible hose carries cold water from the tap or stopcock to the machine's inlet valve, where the appliance draws the flow it needs for brewing, steaming and rinsing. The tubing is sized to fit the inlet port and secured with a threaded collar or clamp, creating a watertight seal that prevents leaks under mains pressure.

To install, the operator shuts off the water supply, disconnects the old hose if present, and threads the new tubing onto the inlet valve. The opposite end is attached to the water source, again using a threaded fitting or clamp. Once both connections are tight, the supply is reopened and the machine primed to purge any trapped air. The tubing remains in place during operation, carrying water on demand without restriction or contamination.

The hose is constructed from food-grade synthetic rubber, chosen for flexibility and resistance to kinking. The black colour is standard for water inlet lines in professional equipment, distinguishing it from steam or drain hoses. No internal components or filters are present; the tubing is a single continuous conduit.

This tubing fits the inlet ports of specified Gaggia and Saeco coffee machines and vending units. Compatibility is determined by the thread size and connection type, which match the original equipment. No tools or modifications are required beyond those used for the original installation.

The product is listed in the spare parts catalogue under water inlet components.