Tray trolley FORCAR CA1475PI

A mobile storage and transport unit built to carry thirty Gastronorm trays without stacking, the FORCAR CA1475PI trolley keeps hot or cold plated food, ingredients or crockery organised between kitchen stations and service points. Trolleys of this type rely on a rigid frame and fixed or swivel castors to move loads that would otherwise require multiple trips or awkward manual handling. The frame supports evenly spaced runners or ledges that accept the standardised tray flanges, preventing slippage while the trolley is wheeled. Because the trays sit side by side rather than stacked, each remains accessible for plating, portioning or retrieval without disturbing the others. The open construction also allows air to circulate, which helps maintain food temperatures during transit. To use the trolley, the operator slides each tray onto its designated runner until the flange rests securely. Once all trays are loaded, the trolley is pushed or pulled to the required location. The swivel castors at the front allow tight turns in corridors and through doorways, while the fixed rear castors provide directional stability under load. When the destination is reached, trays are removed in the same order they were loaded, or left in place for temporary storage. The CA1475PI is constructed from stainless steel side panels and frame, chosen for durability and resistance to corrosion in humid kitchen environments. The runners are integrated into the frame, eliminating joints that could trap food debris. The castors are sealed to prevent ingress of water and grease, and are sized to carry the fully loaded weight without strain. The only control is the handle, which is fixed at a comfortable working height for pushing and steering. No electrical or mechanical adjustments are required. The stated capacity of thirty trays determines the volume of food or crockery that can be moved in a single trip, reducing the number of journeys between preparation, plating and service areas. The overall dimensions of 1380 mm long, 620 mm wide and 1750 mm high set the footprint the trolley occupies in storage and transit, and the clearance needed to pass through doorways and corridors. The height also positions the top tray at a convenient reach for most operators without bending or stretching. The seamless stainless side panels shed grease and steam so the trolley stays hygienic between service rushes without scrubbing. The runners and castors should be inspected regularly for debris that could impede movement or damage trays. The welded frame and fixed side panels eliminate crevices, letting you roll the trolley straight from the pass-through to the wash-down zone without taking anything apart. The trolley is supplied as a single version, article CA1475PI, and is compatible with all Gastronorm tray sizes that fit within the 620 mm width. In the FORCAR catalogue, this product is listed under Trolleys & Transport, Mobile Storage.