Tray trolley FORCAR CA1470P

A mobile storage and transport unit designed to hold thirty full-size catering trays, the FORCAR CA1470P keeps hot or chilled service organised between kitchen and servery. The trolley's frame supports trays in vertical slots, preventing slides and spills while allowing air to circulate around each tray. Side panels enclose the stack, shielding food from draughts and contaminants during transit.

The principle is simple: vertical stacking maximises capacity without increasing footprint, and the four-caster base allows the trolley to be wheeled through doorways and along corridors without tilting or jarring the load. Each tray rests on its own shelf, so portions remain level and sauces stay contained. The side panels add rigidity to the frame and create a partial enclosure that reduces temperature loss or gain during short journeys.

To use the trolley, slide each tray into its slot from the open front, starting at the bottom and working upwards. Once loaded, the side panels prevent lateral movement, and the casters let the unit be pushed or pulled with one hand. At the destination, trays are removed in reverse order, keeping the centre of gravity low until the trolley is empty. No tools or adjustments are needed; the tray spacing is fixed to match standard catering sizes.

Construction is a welded steel frame with powder-coated finish, giving a smooth, corrosion-resistant surface that wipes clean. The side panels are also steel, attached with quick-release clips for occasional removal if bulkier items need to be carried. Four swivel casters provide manoeuvrability; two are lockable to hold the trolley in place during loading or unloading.

The stated capacity of thirty trays means the trolley can handle a full service for a medium-sized event or a half-service for a larger one, keeping all portions together and accessible. The footprint of 1100 mm by 620 mm fits through standard kitchen doorways and service lifts, while the 1750 mm height allows trays to be stacked above worktop level, freeing floor space. The overall weight, though not specified, is kept manageable by the steel frame's balance between strength and lightness, so one person can move the trolley when empty and two can guide it when fully loaded.

Cleaning is straightforward: trays are removed, and the frame and panels are wiped down with a damp cloth and mild detergent. The powder-coated surfaces resist staining and do not require polishing. Casters should be checked periodically for debris that could impede movement, and the locking mechanism tested to ensure it holds securely.

The trolley is supplied as a single unit; no variants or accessories are listed for this article.