More from this brand
Technical data
| Attributes | |
| ARTICLE | L3440194 |
A thermocouple converts heat from a gas flame into a small electric current that holds the gas valve open. When the flame goes out, the current stops and the valve closes automatically, cutting the gas supply to prevent leaks. This safety device is built into professional gas hobs and pot stoves to meet commercial kitchen standards.
The thermocouple is installed between the gas burner and the valve assembly. One end screws into the burner head with an M9x1 thread, while the other end connects to the valve with an M6x0.75 coupling. The 60 cm length allows the sensor to reach from the burner to the valve housing without stretching or kinking the cable.
To fit the thermocouple, the operator first isolates the gas supply. The old sensor is unscrewed from the burner and the valve, then the new unit is threaded into place. The connections are tightened with a spanner, ensuring the sensor tip sits directly in the flame path. Once the gas is restored, the appliance is tested by lighting the burner and verifying the flame stays lit when the ignition button is released.
The cable is sheathed in heat-resistant material to withstand the temperatures near the burner. The threads at each end are machined to match the original equipment, ensuring a gas-tight seal without additional sealing compounds.
This thermocouple fits specific models of BARTSCHER, GIORIK and OFFCAR gas hobs and pot stoves. The listed appliance codes identify the exact equipment it is designed for, avoiding mismatches that could compromise safety or performance.
The product is listed in the spare parts section of the catering equipment catalogue, under gas appliance components.