Straight adjuster LF L5069822

A straight adjuster creates a secure, leak-free connection between two lengths of tubing in a fluid line. It uses a push-fit design: the tube slides into the fitting until it clicks past a grab ring, which locks it in place without tools. The joint can be released by pressing the collet, allowing quick disconnection when the line must be serviced or reconfigured. This method is standard for water, compressed air and low-pressure steam lines in professional kitchens, where speed and reliability matter more than permanent soldered joints.

To use the adjuster, cut the tubing square and remove any burrs. Push the tube into the fitting until it stops; a slight tug confirms the grab ring has engaged. If the line must be broken, press the collet towards the body of the fitting and pull the tube free. No thread sealing compound or spanner is needed, so the connection can be made in tight spaces where access is limited.

The adjuster fits appliances from BILT, COOKMAX and JOHN GUEST, matching the thread and tube diameter those brands specify. It is a spare part for fluid-handling equipment such as combi ovens, bain-maries, beverage dispensers and ice machines where quick assembly and disassembly are part of routine maintenance.

This article is listed in the catalogue under fluid-system components for professional catering equipment.