Stand for equipment 650 Novameta OX0-PL1-30/65/50

A mobile base for countertop appliances, the Novameta Universal Stand 300-65 raises equipment to a comfortable working height and keeps it stable on uneven floors. The stand itself does not include shelves or work surfaces; it provides the framework that holds them. Four vertical legs transfer the weight of griddles, bain-maries, mixers or heated cabinets directly to the floor, while adjustable feet level the unit so that liquids settle evenly and moving parts run true.

The principle is simple: a rigid welded frame carries the load without flexing, and the feet absorb minor floor irregularities. Each foot moves up or down independently, allowing the operator to compensate for slopes or worn tiles. Once level, the anti-slide corners grip the underside of the shelf or appliance, preventing lateral movement during use. This arrangement keeps heavy equipment from shifting under vibration or when drawers are opened.

To set up the stand, the operator positions the legs on the floor, extends the feet until the frame is level, and locks them in place. A shelf or appliance is then placed on the frame and secured with the anti-slide corners. The feet can be readjusted at any time to maintain stability.

Construction is a welded stainless-steel frame with 40 mm square tubular legs. The standard feet offer 65 mm of adjustment, while the optional heavy-duty feet provide 40 mm. Both sets are made of stainless steel and are fitted with non-marking pads. The anti-slide corners measure 100 mm by 100 mm and are fixed to the top of each leg.

The controls are the adjustable feet themselves; each one is turned by hand to raise or lower its corner of the frame. No tools are required once the feet are installed.

A maximum load of 120 kg per shelf means the stand can support a commercial bain-marie, a heavy-duty mixer or a stack of gastronorm containers without deformation. The footprint of 300 mm by 650 mm fits neatly under most countertop appliances, leaving room for adjacent units. The height of 500 mm brings equipment to a comfortable working level, reducing strain on the operator's back and arms.

Cleaning is straightforward: the welded frame has no crevices, and the stainless-steel surfaces wipe clean with a damp cloth. The feet can be removed for thorough cleaning if needed.

Two versions are available: the standard model with 65 mm adjustable feet, and an optional set of heavy-duty feet offering 40 mm of adjustment. The stand is compatible with any equipment that matches its footprint and load rating, including appliances from other manufacturers.

The stand is listed in the Novameta catalogue under worktop support systems.