Adjustable height table Novameta BHS-QRV-120/60/90

This worktable adjusts to suit different tasks, helping kitchen staff work comfortably without bending or stretching. The Novameta Adjustable Height Worktable 1200 features a manual crank or optional motorised lift to raise or lower the surface evenly, keeping trays and tools level during height changes.

A scissor mechanism beneath the tabletop ensures smooth movement. The arms pivot and extend as the crank is turned, lifting the platform steadily. This design is widely used in industrial and medical settings for its reliability. Without hydraulics or compressed air, there's no risk of leaks or pressure loss. The table stays at the chosen height until adjusted again, holding firm under load.

To adjust the height, the operator clears the surface, then turns the crank handle clockwise to lower or anticlockwise to raise. The handle is positioned at the front for easy access. Once the desired height is set, the mechanism locks with an integrated brake, ready for food preparation or assembly. After use, the table can be lowered for cleaning or storage, or left at the set height for the next shift.

The entire structure is stainless steel, including the frame, legs, and work surface. The scissor arms feature sealed bearings to resist corrosion from moisture and cleaning agents. The tabletop is a seamless stainless steel sheet without edges that could trap debris. The open underside allows easy cleaning and inspection of the lift mechanism.

Two width options are available: 650 mm and 700 mm, both with a length of 1200 mm. The height adjusts up to 900 mm, fitting standard professional kitchen worktop heights. The footprint matches that of a fixed-height table of the same length, so no extra floor space is needed.

Cleaning is simple: wipe the stainless steel surface with a damp cloth and sanitiser after use. The open underside lets you clean the lift mechanism with a brush or cloth, removing dust or grease. The sealed bearings need no lubrication, so maintenance is minimal, involving only occasional checks and tightening of fasteners if required.

This table is listed under worktables and preparation surfaces in the professional catering equipment range.