Stainless steel table with sink and shelf GREDIL 674126

A stainless steel worktable provides a hygienic, hard-wearing surface for food preparation, plating and cleaning in professional kitchens. The flat top resists corrosion and holds equipment without warping, while the undershelf keeps tools and ingredients within reach without cluttering the worktop. A built-in sink allows washing, rinsing or soaking directly at the station, reducing trips to a separate wash-up area and keeping workflows organised in tight spaces. The table stands on a welded frame of square steel profiles that distribute weight evenly across four adjustable feet. The left-hand sink is recessed into the work surface, leaving the rest of the top clear for chopping, mixing or assembly. A 40 mm flat rim around the edge prevents spills from dripping onto the floor and gives a secure lip for stacking trays or containers. The sink itself is deep enough to submerge large pots or baking trays, and the 33 mm tap hole accepts standard commercial taps for hot or cold water. Assembly begins by unfolding the legs and securing them with screws. The sink is dropped into its cut-out and sealed with food-safe silicone. Once the tap is fitted, the unit is positioned against a wall or between other workstations. The undershelf is bolted into place at a height that clears standard storage bins or mobile racks. Adjustable feet level the table on uneven floors, ensuring stability during heavy use. The work surface and sink are made from corrosion-resistant stainless steel, reinforced with a laminated panel that resists dents and scratches. The 40×40 mm steel legs are joined with screws for easy dismantling if the table needs to be moved or stored. A flat rim 40 mm high runs around the perimeter, providing a raised edge that contains liquids and supports stacked items. Controls are limited to the tap, which is purchased separately. The tap hole diameter of 33 mm matches standard commercial fittings, allowing the operator to choose a lever or pedal valve for hands-free operation. The overall dimensions of 1200 × 600 × 850 mm create a compact footprint that fits along a wall or between other units without blocking walkways. The 600 mm depth leaves enough room for the sink and undershelf while keeping the front edge within easy reach. The 850 mm height places the work surface at a comfortable level for standing tasks, reducing strain during long shifts. The sink measures 500 × 400 × 250 mm, offering enough volume for washing large utensils or soaking sheet pans. Its left-hand position leaves the right side of the table free for food preparation, making the layout efficient for right-handed operators. Cleaning involves wiping the stainless steel surfaces with a damp cloth and mild detergent after each shift. The laminated panel resists stains and scratches, so no special polish is required. The sink is scrubbed with a non-abrasive pad to remove food debris, and the tap is descaled periodically to maintain water flow. The undershelf is swept or wiped down to prevent dust accumulation. The table is supplied as a single unit with legs, work surface, sink and undershelf. This left-hand sink worktable arrives complete, ready for immediate use in a professional kitchen without additional parts or modifications.