Stainless steel shelf GREDIL 670105

A stainless steel shelving unit provides organised storage for ingredients, utensils and prepared dishes in professional kitchens. The shelves hold items off the floor, keeping them visible, accessible and protected from contamination. The open construction allows air to circulate, reducing moisture and maintaining hygiene standards required in food service environments. The unit stands on four vertical legs connected by horizontal supports. Each shelf is a flat stainless steel panel that rests on the supports and is secured with screws. The legs are made from angled steel, which resists bending and distributes weight evenly across the frame. The entire structure folds flat for transport or storage when not in use, then reassembles without tools. To set up the shelving unit, unfold the legs and lock them into position. Place each shelf on the supports at the desired height and fasten it with the supplied screws. Once assembled, the unit remains stable under the weight of stocked items, with no wobble or sway. The shelves can be adjusted or removed for cleaning or reconfiguration. The construction uses stainless steel throughout, chosen for its resistance to corrosion from moisture, food acids and cleaning chemicals. Stainless steel surfaces on this shelving unit resist food acids and cleaning chemicals, so raw meats, marinades and sanitising sprays leave no permanent stains or smells behind after each service. The surface is smooth, allowing spills to be wiped away without leaving residue. The unit measures 1000 mm wide, 500 mm deep and 1800 mm high, providing a footprint that fits against walls or between workstations in professional kitchens. The height allows for multiple shelves, maximising vertical space without obstructing movement or overhead lighting. The depth of 500 mm is sufficient for standard gastronorm trays and bulk containers, while keeping items within easy reach. Grease and flour dust from daily baking wipe off the smooth stainless shelves with a single pass of a damp cloth, cutting end-of-shift scrubbing to minutes. The stainless steel surface does not require polishing or protective coatings, and the absence of crevices prevents dirt from accumulating. The foldable design simplifies cleaning underneath and around the unit, as it can be moved or temporarily disassembled. The shelves are fastened to the legs with screws, allowing for secure attachment and easy removal when needed. The legs are made from 40 × 40 mm angle profile, providing strength without adding unnecessary weight. The unit is designed for intensive use in professional environments, where stability and durability are essential.