Stainless steel shelf GREDIL 670104

A stainless-steel shelf provides a flat, stable surface for storing ingredients, utensils and prepared dishes in a working kitchen. The metal does not absorb moisture, odours or bacteria, so it stays hygienic under repeated use. Shelving of this type supports heavy loads without sagging, and the open construction lets air circulate freely, keeping stored items visible and accessible.

The GREDIL shelf stands on four vertical legs made from 40 × 40 mm angle profile. Each shelf is fastened to the legs with screws, creating a rigid frame that resists wobble even when fully loaded. The foldable design allows the unit to be collapsed for transport or storage, then reassembled on site without tools beyond a screwdriver.

To set up the shelf, the operator unfolds the legs, aligns the shelves and tightens the screws at each corner. Once assembled, the shelf provides a single flat surface 1000 mm wide, 400 mm deep and 1800 mm high. The height allows items to be stored from floor level to eye level, reducing bending and reaching during service.

The material is corrosion-resistant stainless steel, chosen for its ability to withstand frequent washing and exposure to food acids without pitting or staining. The surface can be wiped down with a damp cloth or sanitised with standard kitchen cleaners, and it dries quickly to prevent water marks.

Legs are constructed from 40 × 40 mm angle profile, which gives the shelf its stability and load-bearing capacity. Shelves are secured to the legs with screws, allowing the unit to be disassembled for transport or repositioning.

The 1000 mm width provides space for multiple trays, containers or boxes side by side, while the 400 mm depth keeps stored items within easy reach. The 1800 mm height maximises vertical storage without requiring a step stool for most users. The overall footprint fits into standard kitchen aisles and storage rooms.

Cleaning involves wiping the shelves and legs with a damp cloth and mild detergent, then drying to prevent water spots. The stainless steel does not require polishing or protective coatings, and the screw-fastened construction allows shelves to be removed for thorough cleaning if needed.

The shelf is supplied as a single unit in the specified dimensions, with no additional variants or configurations listed.