Solenoid valve LF L1120805

A solenoid valve controls the flow of water in commercial coffee machines by using an electromagnetic coil to open or close a valve mechanism. When the machine sends an electrical signal, the coil energises and moves a plunger, allowing water to pass through one of the three ports while blocking another. This switching action directs water to the boiler, group head or steam wand at the precise moment needed for brewing, steaming or rinsing, ensuring consistent pressure and temperature without manual intervention.

The operator does not interact directly with the valve; it is installed inside the machine and wired to the control board. Once fitted, the valve responds automatically to the machine's commands, switching between water paths as the brewing cycle progresses. No adjustment is made during use, and the valve remains hidden behind the machine's panels.

The valve body is constructed from brass, chosen for its resistance to corrosion and high-pressure water. The internal plunger and seals are designed to withstand repeated cycling without leaking. Electrical connections are made via a 230 V supply, matching the standard voltage of commercial kitchens and ensuring compatibility with the machine's existing wiring.

The 8 W power rating indicates a low electrical load, suitable for continuous operation without overheating. The 230 V specification confirms the valve is intended for mains-powered equipment, not for low-voltage systems. The three-way configuration allows the valve to switch water between two outlets or from a single inlet to one of two paths, a function essential for machines that alternate between brewing and steaming.

Cleaning is limited to external inspection for leaks or corrosion, as the valve is not designed to be disassembled. Any internal failure requires replacement of the entire unit. The valve is a sealed component with no user-serviceable parts.

This solenoid valve is a direct replacement for specific models of ASCASO, ATEL, BFC, CIME, CONTI, DE VECCHI GIUSEPPE, GEV, GORENJE, NUOVA SIMONELLI, ODE, ROYAL, SYNCHRO and VICTORIA ARDUINO coffee machines. It is listed under the spare parts category for professional espresso equipment.