Service trolley ROCAM 04000DRARININ

A serving trolley built to move hot plates, stacked trays or bulk ingredients across a busy kitchen or dining floor without vibration or noise. The welded stainless steel tiers form a rigid platform that carries up to 250 kg while keeping the load stable; the large 160 mm castors roll smoothly over thresholds and floor joints, and non-marking bumpers protect walls and door frames from scuffs.

The trolley is pushed by hand, so the weight of the load is carried by the frame and transferred to the castors. Because the tiers are fully welded to the uprights, the structure does not flex or twist under uneven loads, and the noise-proof construction dampens the rattle of crockery or metal trays. The operator simply loads the shelves, releases the handbrake if fitted, and steers the trolley to the service point or wash-up area.

Two shelves give separate storage for hot and cold items or for incoming and outgoing dishes. The stainless steel surface is easy to wipe down between services, and the open design allows air to circulate so that hot plates cool gradually rather than steaming up the lower shelf.

The frame is made from AISI 304 stainless steel, chosen for its resistance to corrosion and staining in a kitchen environment. The castors are fixed directly to the base, and the non-marking bumpers are mounted at each corner to absorb minor impacts.

Controls are minimal: a handbrake on the optional brake kit locks two of the castors to hold the trolley in place. No electrical supply is needed, so the trolley can be used anywhere in the kitchen or dining area.

The 250 kg payload rating means the trolley can carry bulk ingredients, stacked gastronorm trays or a full service of plated dishes without risk of overloading. The 41 kg weight of the trolley itself is light enough for one person to manoeuvre when empty, yet heavy enough to remain stable when fully loaded. The footprint of 1113 mm by 622 mm fits through standard kitchen doorways and between worktops, while the 983 mm height keeps the shelves at a comfortable working level for staff of average height.

Cleaning is straightforward: the stainless steel shelves and frame can be wiped down with a damp cloth and sanitiser after each service. The castors should be checked periodically for debris that could impede movement, and the bumpers inspected for wear.

Optional extras include a brake kit for two castors, which secures the trolley on sloping floors, and a stainless steel trash container that slides under the lower shelf for waste collection during table clearing.

The trolley is listed in the ROCAM catalogue under serving and clearing equipment for professional kitchens.