Neutral module ROCAM 01900OMCRNQI

A 45° internal corner unit that links straight Omnia modules into a continuous self-service line without dead space. The angled face bridges two runs of counter at right angles, letting customers flow past without bottlenecks while staff load and replenish from the rear.

The corner is built as a rigid stainless-steel frame that carries interchangeable panels. Hot air circulates freely behind the panels, so refrigerated modules can be placed on either side without overheating. Adjustable feet level the unit on uneven floors; a plinth hides the feet for a seamless look. Castors are not supplied, because the AQ/I is designed to sit flush with adjacent fixed counters.

Assembly begins by positioning the frame on site. The operator fits the chosen panels—laminated wood, stainless steel, powder-coated steel or over-panelled wood—then secures them with concealed fixings. Adjustable feet are set to the correct height and locked. If the optional plinth is used, it clips onto the base after the feet are levelled. Once the corner is in place, straight modules are butted against its 45° faces and bolted through pre-drilled flanges, creating a rigid, gap-free run.

The stainless-steel structure gives the unit its strength and hygiene. Panels are available in laminated wood for warmth, stainless steel for durability or powder-coated steel for colour. Over-panelled wood combines a wood finish with a rigid backing. A range of colours—from silver and saffron to wenge and pure white—lets the corner match any kitchen palette.

Controls are limited to the adjustable feet, which are set with a spanner. No electrical or plumbing connections are required, so the unit can be installed anywhere in the layout.

The 747 mm width and 910 mm height create a compact footprint that fits between standard worktop heights and service-counter depths. The 45° angle means the corner occupies less floor space than a square junction, freeing up room for customer movement or additional equipment.

Cleaning is straightforward: panels are wiped down with a damp cloth and mild detergent. Stainless-steel surfaces can be sanitised with standard kitchen chemicals. The adjustable feet and plinth are removed periodically to sweep out dust and debris.

Optional accessories transform the corner into a functional workstation. Foldable dish holders, tiltable countersinks, removable tray slides and custom adhesive stickers can be added to either side, turning the unit into a self-service hub or a staff replenishment point. Each accessory is bolted onto the frame, so the corner can be reconfigured as needs change.

The module is part of the ROCAM Omnia AQ range, designed for seamless integration with other AQ modules in self-service and buffet layouts.