Milk jug LF L5062793

A milk jug is the bridge between the steamer and the cup. In professional kitchens and coffee stations, it holds cold milk while the steam wand injects hot, pressurised vapour. The vapour creates a vortex that stretches and heats the milk evenly, turning it into microfoam without scorching. The jug's shape guides the flow: a narrow spout concentrates the pour, letting the barista layer the foam into the espresso with a steady hand. The handle sits clear of the rim so the operator can tilt the jug without touching the hot metal, and the pouring lip is sharp enough to cut the foam cleanly, leaving no drips on the cup's edge.

The sequence is simple but precise. Cold milk goes into the jug up to the fill line, usually marked on the inside. The steam wand is purged, then submerged just below the milk's surface. As the wand injects steam, the operator lowers the jug to keep the tip at the same depth, drawing in air to create the foam. Once the milk reaches the target temperature, the wand is withdrawn, the jug wiped, and the milk poured immediately before the foam settles. The jug's weight and balance let the operator control the speed and angle without strain, even during a busy service.

Construction is straightforward: a single piece of food-safe stainless steel, seamless and polished to a mirror finish. The base is flat so the jug sits securely on the worktop between uses, and the rim is rolled to prevent sharp edges. There are no moving parts, no coatings, and no crevices where milk can lodge and sour. The jug is washed by hand after every use, rinsed in hot water, and left to air-dry upside down on a rack. The polished surface resists staining and odours, so the jug stays hygienic through repeated cycles.

The LF milk jug is sized for the volume of milk a single espresso drink requires, making it a standard tool on barista stations, café counters, and catering worktops where coffee is served in volume. It fits no specific machine but works with any commercial steam wand, from espresso machines to dedicated milk frothers. In the LF catalogue, it sits among barista accessories, grouped with tampers, knock boxes, and dosing tools for professional coffee preparation.