More from this brand
Technical data
| Attributes | |
| ARTICLE | L3240820 |
| VOLTAGE | 1NO + 1NC 16A 250V |
1NO + 1NC 16A 250V
A microswitch is the safety and control component that opens or closes an electrical circuit the instant a moving part reaches a set position. In professional catering equipment, it stops a door from closing too far, starts a cycle when a basket is lowered, or cuts power if a panel is opened. The switch reacts to a light mechanical force—often a lever or plunger—so that a small movement at the actuator triggers an immediate change in the circuit, protecting both the appliance and the operator.
The LF Microswitch Electrica NR48W5 is a single-pole changeover unit rated 16 A at 250 V. One normally open and one normally closed contact allow it to either complete or break a circuit depending on the position of its actuator. The operator presses, releases or tilts the actuator; the switch responds instantly, sending the signal that starts, stops or diverts the current.
Construction is a sealed housing that keeps out dust and moisture, with terminals for quick wiring. The voltage rating of 250 V matches the standard single-phase supply in British commercial kitchens, so the switch can be wired directly into the appliance without additional transformers or relays. Its 16 A current capacity is sufficient for the control circuits of most professional equipment, from fryers and dishwashers to ironing machines and refrigerated counters.
This microswitch fits a wide range of appliances from AGA, Bianchi, Cimsa-Fabar, Domus, Emmepi, Fagor, Fama, Fimar, Framec, Friul Company, Friulinox, Giga, Giorik, GMP, Grandimpianti, Küppersbusch, Lasa, Macap, Mareno, Offcar, Project Systems, Sammic, Silko, Tecnoinox and Zanussi. The list includes specific models of fryers, dishwashers, mangles, blast chillers, refrigerated counters, convection ovens, bratt pans, grinders and extractors.
Cleaning is limited to wiping the exterior with a dry cloth; the sealed housing prevents internal contamination. No lubrication or adjustment is required. The switch is supplied as a single unit, ready for installation in the matching appliance.