Microswitch LF L3240123

This electromechanical microswitch detects small movements in professional espresso machines. When a lever or button is pressed, it triggers the pump, valve, or heating element, ensuring the machine operates correctly without overfilling or unsafe water flow.

Installation involves removing the machine's side or back panel, replacing the old switch, and reconnecting the terminals. Once fitted, the control board receives the proper signal each time the lever is activated, maintaining consistent shot volume and temperature.

Built with a sealed plastic body and metal contacts, the switch is rated for 16 A at 250 V. This rating allows it to manage the inductive load of pumps and solenoids in commercial espresso equipment, while the sealed housing resists steam and moisture common in busy café settings.

The 16 A 250 V specification confirms compatibility with single-phase circuits in commercial kitchens. No extra relay or protection is needed if the machine's wiring is correctly sized.

Maintenance is simple: wipe the exterior with a dry cloth. No internal servicing is required. The unit is a direct replacement and comes as a single model.

Compatible brands include Aristarco, Ariston, Astoria CMA, Bianchi, Bosch-Siemens, Bras, Brasilia, Brema, Casadio, Cimbali, Compak, Cunill, Eloma, Eureka, Faema, Fagor, Fama, Fiorenzato C.S., Futurmat-Ariete, Gaggia, Girbau, Grandimpianti, Hotpoint, Indesit, Krups, Macap, Marcfi-Ancas, MBM, Meiko, Moretti, Necta Vending, NTF, Nuova Simonelli, Primus, Rheavendors, Robot Coupe, Rossi, Saeco, San Marco, Santos, Sirman, Spaziale, Ugolini, VEMA, VFA Expres, Vibiemme and Whirlpool.