Kitchen work table Novameta 26-00651-00.00.00 SB_A

A stainless steel worktop with two deep sinks gives a professional kitchen a dedicated space for washing, rinsing and food preparation. The unit stands on the floor, providing a solid, hygienic surface at standard worktop height. One sink is sized for general washing and rinsing, while the adjacent second sink allows separate tasks such as vegetable preparation or utensil cleaning without cross-contamination.

The worktop is a flat sheet of stainless steel mounted on a welded frame. Stainless steel is chosen for its resistance to corrosion, ease of sanitising and durability under constant use. The frame supports the weight of the sinks, the water they hold and any items placed on the worktop. The sinks themselves are deep rectangular basins pressed from the same stainless steel sheet, with rounded corners for easy cleaning. Each sink has a rim that sits flush with the worktop, preventing spills from running underneath.

To use the unit, the operator fills one or both sinks with water from a tap mounted above or beside the worktop. Items are washed or rinsed in the appropriate sink, then set on the worktop to drain. The larger sink may be used for soaking larger pots or trays, while the smaller one keeps a constant supply of clean water for rinsing. After use, the sinks are emptied by lifting the plug or by tilting the basin if no plug is fitted.

The overall dimensions of 2530 mm wide, 700 mm deep and 850 mm high create a substantial work surface that fits into a standard kitchen layout. The width allows two sinks to be placed side by side with enough worktop space on either side for preparation or draining. The depth of 700 mm provides room for the sinks and a tap without encroaching on the aisle behind. The height of 850 mm matches standard worktop height, allowing comfortable use without bending.

Cleaning is straightforward: the stainless steel surface is wiped down with a damp cloth and sanitiser after each service. The sinks are scrubbed to remove food debris, and the plugs or drains are checked to ensure they are clear. The worktop and sinks are designed with smooth welds and rounded corners to prevent dirt from accumulating in crevices.